Tigo RSS Signal Detector Verifies Rapid Shutdown Signals
The Tigo RSS Signal Detector is a handheld test tool that senses the power-line communication (PLC) signal from the Tigo RSS Transmitter to TS4-F, TS4-R-F and TS4-A-F (Fire Safety) units. Installers use it to confirm each unit is receiving the keep-alive signal.
Tigo describes it as the failsafe tool to confirm a PV system meets NEC 2017 690.12 rapid shutdown requirements.
Why You'll Love The Tigo RSS Signal Detector
Know before you leave the roof. Check every fire safety unit for the keep-alive signal during installation.
Clear result. The LED changes from blue to yellow and an audible alert sounds when the signal is detected.
Simple to use. Hold the sensor area within 2 in (5 cm) of the TS4 unit.
Ready out of the box. Ships with 4 AA batteries.
Your life, with the Tigo RSS Signal Detector
Instead of wondering whether a unit is talking to the transmitter, you walk the array and get a clear yes at each module. Fewer callbacks, faster commissioning and confident sign-off.
The Tigo RSS Signal Detector in a nutshell
PLC signal tester
Senses the RSS Transmitter keep-alive signal at the TS4 unit.
Works with Tigo fire safety units
For TS4-F, TS4-R-F and TS4-A-F units.
Visual and audible alert
LED turns from blue to yellow with a sound when the signal is present.
Battery powered
Includes 4 x AA batteries.
Tigo RSS Signal Detector specifications
General
-
Part number: 400-00900-00
-
Function: Tester for PLC rapid shutdown signal (Fire Safety)
-
Detection distance: Sensor within 2 in (5 cm) of the TS4 unit
-
Indicator: LED (blue to yellow) and audible alert
-
Power: 4 x AA batteries (included)
How to test
- Install the TS4 units fully and power on the RSS Transmitter
- Place the sensor area within 2 in (5 cm) of each TS4 unit
- Confirm the LED change and audible alert
Let the experts help you find your perfect Tigo RSS Signal Detector setup
Commissioning a Tigo fire safety system for the first time? Call us and we will walk you through the test steps and the parts you need.
Email support@kratopower.com or call +1 888-855-7286.
Tigo RSS Signal Detector documents and materials
Safety disclaimer: Testing takes place on energized PV arrays. Testing should be carried out by a qualified installer following the manufacturer's instructions. You use this product at your own risk. The content on this page is general product information, not professional or medical advice. If you have any doubt, consult a qualified professional.
