SRNE SR-RM-5: Check Your Solar Controller At A Glance
Charge controllers usually end up tucked next to the batteries, out of sight. The SRNE SR-RM-5 is a remote LCD display unit that lets you see your controller's data and change its settings from a more convenient spot. It connects over RS232 with the included 2 m RJ12 cable and mounts on a panel or a wall.
Why You'll Love The SRNE SR-RM-5 Display
Everything on one screen. The 128 x 64 LCD main menu shows up to 10 parameters and states at once, with graphic and numeric views.
Adjust settings remotely. Set charging and discharging parameters, backlight time and the fault alarm from the display.
Easy to install. Mounting screws for panel or wall installation and plastic expansion bolts are included in the box.
Low power draw. Under 35mA at 12V with the backlight on, and under 25mA with it off.
Your life, with the SRNE SR-RM-5 Display
Your controller is out in the battery shed, but the display sits by the back door. On your way out each morning you glance at it and see the battery voltage, charge state and solar input. No more trips to the shed just to check.
The SRNE SR-RM-5 Display in a nutshell
Clear 128 x 64 LCD
Menus in numeric and graphic forms, plus historical data reading from the controller.
Status indicators
System fault and communication indicators show at a glance if anything needs attention.
Four-key navigation
Simple keys to browse menus and change settings.
Voice alarm option
Turn the audible controller fault alarm on or off.
SRNE SR-RM-5 Display specifications
General
-
Model: RM-5 (standard version, no Bluetooth)
-
Display: 128 x 64 LCD
-
Communication: RS232, RJ12 6-pin port
-
Static consumption: Under 35mA/12V backlight on, under 25mA/12V backlight off
-
Backlight time: Adjustable 1 to 600 s, or always on
-
Operating temperature: -31 to 149°F (-35 to 65°C)
-
Dimensions: 4.56 x 4.56 in (115.82 x 115.82 mm)
-
Weight: 1.1 lb (0.5 kg)
In the box
- LCD display unit
- Data cable, 2 m, 6-core, RJ12 at both ends
- User manual
- Tapping screws KA3 x 12 mm (4) for panel mounting
- Tapping screws KA4 x 25 mm (4) for wall mounting
- Plastic expansion bolts M6 x 25 mm (4)
Let the experts help you find your perfect SRNE SR-RM-5 Display setup
Want to confirm the SRNE SR-RM-5 works with your controller model? Send us the model number and we will check compatibility.
Email support@kratopower.com or call +1 888-855-7286.
SRNE SR-RM-5 Display documents and materials
Safety disclaimer: Display units connect to charge controllers on live DC systems. Installation should be carried out by a qualified installer in line with local codes and the manufacturer's manual. You use this product at your own risk. The content on this page is general product information, not professional or medical advice. If you have any doubt, consult a qualified professional.
