SRNE HF2430U80-H Inverter Charger Brings 3,000W Off-Grid Power
A 24V battery bank is the sweet spot for cabins, vans, sheds and small off-grid homes. The SRNE HF2430U80-H inverter combines a 3,000W pure sine wave inverter, an 80A MPPT solar charge controller and a 40A AC charger in one transformerless unit. It outputs 120Vac and accepts up to 500V of PV, so you can run long panel strings with less wiring.
Why You'll Love The SRNE HF2430U80-H Inverter
Real power from a 24V bank. 3,000W rated output with a 6,000VA peak and capacity for a 2HP motor, so a well pump or fridge compressor can start without tripping.
High voltage solar input. Up to 500Vdc open circuit and 4,000W of PV on one MPPT. Longer strings mean fewer combiners and thinner wire runs.
Three ways to charge. Solar through the 80A MPPT, grid or generator through the 40A AC charger, or both together at up to 80A in hybrid mode.
Flexible and connected. Works with lead-acid, lithium-ion and user-defined batteries, with RS485, CAN, USB and dry contact ports plus an optional Wi-Fi or GPRS module.
Your life, with the SRNE HF2430U80-H Inverter
The cabin lights come on, the fridge hums and the coffee maker runs, all from the sun. On a cloudy week the generator kicks in to top up the batteries, then hands back to solar. You stop thinking about power and start enjoying the place.
The SRNE HF2430U80-H Inverter in a nutshell
3,000W pure sine wave output
120Vac single phase at 50/60Hz, 6,000VA peak and a 10ms transfer time.
80A MPPT solar charging
One MPPT tracker, 120 to 450Vdc operating range, 500Vdc max open circuit voltage and 99.9% MPPT efficiency.
Grid and generator ready
90 to 140Vac AC input, a 40A AC charger and a 40A bypass overload rating.
Programmable priorities
Set output priority (solar, utility or solar-battery-utility) and charge priority to match how and when you use power.
SRNE HF2430U80-H Inverter specifications
Inverter output
-
Rated output power: 3,000W
-
Peak power: 6,000VA
-
Motor capacity: 2HP
-
Output voltage: 120Vac single phase
-
Frequency: 50 / 60Hz
-
Waveform: Pure sine wave
-
Transfer time: 10ms
-
Max battery inverter efficiency: 92%
Battery
-
Battery voltage: 24V
-
Voltage range: 20 to 33Vdc
-
Battery types: Lead-acid, lithium-ion, user-defined
-
Max MPPT charge current: 80A
-
Max mains / generator charge current: 40A
-
Max hybrid charge current: 80A
PV input
-
MPPT trackers: 1
-
Max PV array power: 4,000W
-
Max PV input current: 13A
-
Max open circuit voltage: 500Vdc
-
MPPT voltage range: 120 to 450Vdc
-
MPPT efficiency: 99.9%
AC input
-
Input voltage range: 90 to 140Vac
-
Frequency: 50 / 60Hz
-
Bypass overload current: 40A
General
-
Topology: Transformerless
-
Communication: RS485, CAN, USB, dry contact; optional Wi-Fi or GPRS module
-
Dimensions: 14.9 x 11.0 x 4.1 in (378 x 280 x 103 mm)
-
Weight: 17.6 lb (8 kg)
-
Operating temperature: 5 to 131°F (-15 to 55°C)
-
Installation: Indoor only
-
Certifications: cETL, UL1741, CSA C22.2
-
Warranty: 2 years
Protection
- PV current and power limiting, PV reverse polarity and night anti-reverse charging
- Utility over and under voltage, AC back-feed and bypass overcurrent
- Battery over and under voltage, battery input overcurrent and charging short circuit
- Output short circuit, overload and radiator over-temperature
Let the experts help you find your perfect SRNE HF2430U80-H Inverter setup
Not sure if 24V and 3kW fits your loads? Send us your appliance list, battery bank and panel specs and we will check the sizing and string design for the SRNE HF2430U80-H inverter.
Email support@kratopower.com or call +1 888-855-7286.
SRNE HF2430U80-H Inverter documents and materials
Safety disclaimer: Inverter chargers connect to batteries, solar arrays and AC wiring that carry dangerous voltages. Installation should be carried out by a licensed electrician in line with local electrical codes and the manufacturer's manual. You use this product at your own risk. The content on this page is general product information, not professional or medical advice. If you have any doubt, consult a qualified professional.
