Grundfos ES-SP3C1 Splice Kit For Clean Pump Wiring
The splice between your drop cable and the pump motor lead sits underwater for years, so it has to be right the first time. The Grundfos ES-SP3C1 wire splice kit is made for 3-wire connections on #14 to #10 AWG cable. It gives you the parts to make that joint during a new install or a pump replacement.
Why You'll Love The Grundfos ES-SP3C1 Splice Kit
Sized for common pump wire. It covers #14, #12 and #10 AWG, the gauges used on most residential submersible pump runs. One kit, no guessing.
Three-wire ready. Built for 3-wire connections, so each conductor gets its own joint. That keeps the splice neat and easy to check.
Clear construction. The clear kit lets you see the connection as you work. That helps you confirm a good joint before the pump goes down the well.
Handy to keep on the truck. At this price it makes sense to keep a spare on hand for service calls and pump swaps.
Your life, with the Grundfos ES-SP3C1 Splice Kit
The new pump is on the well head and the drop cable is ready. You strip the leads, make the joints and seal them up. The pump goes down, the power comes on and you never have to think about that splice again.
The Grundfos ES-SP3C1 Splice Kit in a nutshell
Wire range
Designed for #14 to #10 AWG conductors.
Conductor count
One kit handles a 3-wire splice.
Clear finish
Clear construction for easy visual inspection.
Pump install essential
Joins the drop cable to the submersible pump motor lead during installation or replacement.
Grundfos ES-SP3C1 Splice Kit specifications
General
-
Part number: ES-SP3C1
-
Brand: Grundfos
-
Type: Wire splice kit
-
Wire size: #14 to #10 AWG
-
Conductors: 3-wire
-
Color: Clear
Installation notes
- Follow the splice kit instructions and the pump manufacturer's cable splicing guidance
- Match conductor colors when joining the drop cable and motor lead
- Check wire size against your pump's maximum cable length chart
Let the experts help you find your perfect Grundfos ES-SP3C1 Splice Kit setup
Not sure whether the Grundfos ES-SP3C1 matches your wire gauge or pump? Send us your pump model and wire size and we will confirm you have the right parts.
Email support@kratopower.com or call +1 888-855-7286.
Grundfos ES-SP3C1 Splice Kit documents and materials
No manufacturer document is published for this splice kit. The Grundfos SQ installation instructions below include cable sizing and splicing guidance.
Safety disclaimer: Pump wiring carries mains voltage and is installed underwater. Splicing should be carried out by a licensed professional in line with local electrical codes and the manufacturer's instructions. You use this product at your own risk. The content on this page is general product information, not professional or medical advice. If you have any doubt, consult a qualified professional.
