AES RACKMOUNT Cable Kit Wires Modules Without a Combiner
The AES RACKMOUNT Cable Kit (950-0074) is for installers who do not want to use the AES RACKMOUNT Battery Module Combiner. It includes a DC positive and a DC negative 3 AWG cable, each 2 meters long, with an Amphenol SurLok Plus connector on the battery end and an M8 ring terminal on the other. Plug into the module, bolt to your busbar or inverter and you are done.
Why You'll Love The AES RACKMOUNT Cable Kit
Ready to install. Cables come cut and terminated, so there is no crimping on site.
Skip the combiner. Run each module straight to your own busbar or DC distribution.
Generous 2 m length. Enough reach for most rack and wall layouts.
Matched connectors. SurLok Plus plugs fit the AES RACKMOUNT front terminals, and M8 ring terminals suit common busbars.
Your life, with the AES RACKMOUNT Cable Kit
Your rack of AES RACKMOUNT batteries feeds a busbar you already installed. Each module gets its own pair of cables, clicked in at the battery and bolted at the bar. Clean, labeled and easy to service.
The AES RACKMOUNT Cable Kit in a nutshell
Positive and negative cables
DC positive and DC negative cables in one kit.
3 AWG, 2 m
3 AWG cable, 2 meters (78.7 in) long.
SurLok Plus to M8 ring
Amphenol SurLok Plus connector at the battery, M8 ring terminal at the other end.
No combiner needed
Designed for installs that do not use the AES RACKMOUNT Battery Module Combiner.
AES RACKMOUNT Cable Kit specifications
Kit
-
Part number: 950-0074
-
Cables: DC positive and DC negative
-
Cable size: 3 AWG
-
Length: 2 m (78.7 in)
-
Battery end: Amphenol SurLok Plus connector
-
Other end: M8 ring terminal
SurLok Plus connector ratings
-
Current rating: 120 A max
-
Operating voltage: 1000 Vdc
-
IP rating: IP67 (when connected)
Compatibility
-
Battery: Discover AES RACKMOUNT 48-48-5120 and 48-48-5120-H
Let the experts help you find your perfect AES RACKMOUNT Cable Kit setup
Deciding between the cable kit, the battery module combiner or the Slimline enclosure? Tell us how many modules you are installing and we will lay out the parts list.
Email support@kratopower.com or call +1 888-855-7286.
AES RACKMOUNT Cable Kit documents and materials
Safety disclaimer: Battery cables carry high DC current. Installation should be carried out by a licensed electrician in line with local electrical codes and the manufacturer's manual, including correct fusing and disconnects. You use this product at your own risk. The content on this page is general product information, not professional or medical advice. If you have any doubt, consult a qualified professional.
